Microsens MS655102/12x - Manual (Page 17)

15
Wall-Mount Plate Mounting
Follow the steps below to mount the industrial switch with wall-mount plates.
1. Remove the DIN-Rail clip from the industrial switch; loose the screws
which secure the clip.
2. Place the wall-mount plates on the top & bottom sides of the industrial
switch.
3. Use the screws included to attach the wall-mount plates to the industrial
switch.
4. Use the hook holes at the corners of the wall-mount plates to hang the
industrial switch on the wall.
5. To remove wall-mount plates, reverse the steps above.