Daewoo DT-42A1 - Manual (Page 40)

PC
/D
V
I
PC DVI
• N.B. : You cannot select PC or DVI if the picture in
picture mode is on.
41
NOTES:
1) The resolution of the PC monitor is the best at 640 x 480 (VGA).
2) If there is a [Vertical Frequency]setting menu in the [Display]
menu of the PC, adjust the frequency to 60Hz.
3) If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
4) DVI input port receives only digital signal.
5) Depending on the graphic card when plugged or unplugged the
DVI connection the screen may not display correctly.
Restart the computer if this happens.
Press the Power Buttons.
• Turn on the PDP and the PC.
3
Input Select
• Select [DVI] by pressing the [PC/DVI button
of the remote control or the Input button on
the PDP unit.
• Each time you press the [PC/DVI] button,
a different input mode appears.
The sequence is as follows:
4
Enjoy Dynamic Ultra Screen Monitor by
Using PC’s Keyboard or Mouse. 5