Metz MECABLITZ 64 AF-1 digital Pentax - Manual (Page 203)

11.13 Connecting a power pack
(accessory)
A power pack (accessory) can be connected
to the flash unit using port
ቴ.
You need a connection cable (special acces-
sory) to connect the power pack.
The power pack extends the operating time
of the flash unit and provides faster flash
recycling times.
Setting procedure
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the
touch display.
• On the touch display, press the
sensor button for a very fast recycling time
or the
sensor button for a fast recycling
time.
The setting is adopted immediately.
OPTION
POWERPACK
POWERPACK
D
12 Favorite programme
In flash photography there are always recur-
ring standard situations (e.g. birthday cele-
brations at home, etc.). The ecablitz permits
the settings for such standard situations to
be stored as a favorite programme so that the
selected flash parameters can be instantly
reset.
The flash unit has 4 memory locations for
saving the settings made on the flash unit.
Procedure for saving a favourite programme
• Set the flash unit parameters.
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the touch
display.
• Press the sensor button on the
touch display.
• Press the . . . sensor button on
the touch display.
The settings are saved to the selected memo-
ry location.
SAVE
F4 F1
D
203
k
OPTION
POWERPACK
O
OPTION
O
q p
m/ft
POWERPACK
AF BEAM
F1
F3 F4
SAVE LOAD
F2
O