Metz MECABLITZ 64 AF-1 digital Pentax - Manual (Page 185)

10 Cordless flash mode
The flash unit supports the wireless Pentax P
TTL remote system.
The remote system consists of a master flash
unit on the camera and one or more slave
flash units. The slave flash unit(s) are con-
trolled via wireless technology by the reflec-
tor of the master flash unit.
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
The slave flash units must be able to receive
the light from the master flash unit with the
integrated sensor for remote mode.
In remote flash mode, the maximum flash
range is not indicated on the flash unit's
display panel.
10.1 Remote master mode settings
In remote master mode the master flash unit
on the camera controls all slave flash units
and also contributes to exposure of the shot
itself.
10.1.1 Remote master mode settings
• Switch on the flash unit with the ባ
button.
The start screen appears.
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on
the touch display.
Remote master mode is set.
REMOTE MASTER
REMOTE MASTER
185
k
MODE
O
q p
SPOTBEAM
REMOTE MASTER
REMOTE CONTROL
0.8- 9.0 m
F
5,6
M-
Zoom 35 m
m
PTTL
i
EV
M-
Zoom 35
i
EV
m
m
REMOTE
MASTER