Metz MECABLITZ 64 AF-1 digital Sony - Manual (Page 184)

10.1.4 Defining the lighting conditions
(RATIO) for the flash groups on the
master flash unit
The lighting conditions of the remote system
can be set to achieve particular lighting
effects. The lighting conditions for the master
(CTRL) and the groups (RMT, RMT2) are con-
trolled exclusively via the master flash unit.
Ratio activate / deactivate
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the touch
display.
• Press the or sensor button on
the touch display and switch the RATIO
function on or off.
D
PARAMETER
RATIO
RATIO
OFF ON
Defining the lighting conditions (RATIO
• Press the sensor button on the
touch display.
• Press the sensor button on the touch
display for which a lighting condition is to
be set, in the example RMT2.
• Press the sensor buttons on the
touch display set the desired lighting con-
dition or switch off the lighting contribution
(--).
• Press the sensor buttons on the touch
display for the desired correction value.
The setting is applied immediately.
RATIO
184
k
CTRL RMT RMT2
4 8 1
REMOTE
CTRL+
M
1/8
i RATIO
PARAMETER
PARAMETER
O
q p
CHANNEL
RATIO
CONTROL
RTM2
O
q p
4
8
16
RATIO
O
OFF
ON
8
1
4
O
RATIO
CTRL
RMT
RMT2
CTRL RMT RMT2
4 8 8
REMOTE
CTRL+
M
1/8
i RATIO