Metz MECABLITZ 52 AF-1 digital Nikon - Manual (Page 162)

162
k
10.1 Remote master mode settings
The slave group A is activated at the factory.
The master flash unit and slave groups A, B
and C can be activated or deactivated!
If the master flash unit is deactivated, it
only controls the slave units and does not
contribute to exposing the shot.
10.1.1 Remote master mode settings
• Switch on the flash unit with the ባ
button. The start screen appears.
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the
touch display. Remote master mode is set.
Remote master mode is shown in the picture.
Remote master mode is shown in the picture.
The master does not make any contribution
to exposure (REMOTE MASTER off ).
If the master is to contribute to exposure,
then set the mode
or on the master
(see 10.1.2).
MASTER
MASTER
TTL M
MASTER
MODE
EV
REMOTE
MASTER
INFO AIBIC
A 4 —
B 4 —
C 4 —
OFF
GN
MASTER
SLAVE
Off
TTL
M
REMOTE
MASTER
INFO AIBIC
A 4 —
B 4 —
C 4 —
OFF
REMOTE
MASTER
INFO AIBIC
A 4 —
B 4 —
C 4 —
TTL
10.1.2 Setting the flash mode on the master
flash unit
• Press the sensor button on the touch
display as many times as it takes for the
master selection to appear.
• Press the sensor button on the
touch display.
• Use the sensor buttons to set the
mode to "TTL" or "M".
• Press the sensor button on the touch
display for the desired mode of operation
or alternatively .
The set mode of operation is adopted
immediately.
Off
MODE
TTL M
TTL
INFO
EV
0,7 -7,9 m
Z
OOM 35 F4.0 m
m