Metz MECABLITZ 52 AF-1 digital Nikon - Manual (Page 160)

160
k
Resetting to auto-zoom
• Touch the shutter release to begin a data
transfer between the flash unit and the
camera.
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select "Zoom".
• Press the sensor button on the
touch display.
• Press the sensor buttons on the touch
display and select .
After around 10 seconds, the operation
display appears, or press the
ቨ button
repeatedly until the operation display
appears.
D
PARA
Zoom
A.Zoom
D
Wide-angle diffuser
With the wide angle diffuser ቪ, focal lengths
of 12 mm or more can be illuminated (35 mm
format).
Pull the wide-angle diffuser ቪ out from
the reflector as far as it will go, and then
release it.
The wide-angle diffuser
ቪ automatically
folds downwards. The reflector automatically
moves to the required position.
The distance readings and the zoom value
are corrected to 12 mm on the display panel.
The automatic adjustment of the motor-zoom
reflector
ቪ is not activated if the wide-angle
diffuser is in use.
To insert the wide-angle diffuser ቪ, turn it
upwards 90° and push it all the way in.
mecabounce Diffuser MBM-02
If the Mecabounce (optional accessories, see
18) is fitted to the reflector of the flash unit,
the reflector is automatically guided to the
position required. The distance data and
zoom factor are corrected to 16 mm.
The automatic adjustment of the motor-zoom
reflector is not activated if the Mecabounce
is in use.
The simultaneous use of the wide-angle dif-
fuser and the Mecabounce is not possible.
EV
ZOOM
A.Zoom
24
+