Metz MECABLITZ 52 AF-1 digital Nikon - Manual (Page 156)

156
k
The faster the shutter speed, the lower the
guide number!
The setting for automatic high-speed syn-
chronisation occurs on the camera (see
camera operating instructions)!
The display of the flash unit then in addition
shows "FP" (
) .
7.5 Manual flash mode with distance
guideline (GN)
In this flash mode you enter the distance to
the subject in the flash unit. The mecablitz
52AF-1 coordinates the flash output and the
f-stops provided by the camera.
If sufficient exposure is not achieved for the
distance set, the sign
appears in front of
the distance information.
TTL
FP
Setting the mode of operation
• Switch on the flash unit with the
ባ
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last.
• Tap the shutter release to transfer data
between the flash unit and the camera.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the touch
display.
• Press the sensor button on the touch
display for the distance.
• Press the sensor buttons on the
touch display and select the distance to the
subject.
• Press the sensor buttons for the distance
selected.
The setting will take effect immediately.
GN
GN
M
GN
MASTER
2,5 m
3,0 m
3,5 m
M
INFO 1/1
7,9 m
Z OOM 35 F4.0 m
m
GN
1,0 m
INFO EV
Z
OOM 35 F4.0 m
m
GN
1,0 m
INFO EV
Z
OOM 35 F4.0 m
m