Metro MetroMax i One-Piece Undershelf Slide - Manual (Page 2)

D
ONE-PIECE UNDERSHELF SLIDE
Item Description Qty.
A. Hanger 4
B. Screw #10-24x 1 /
2
Lg. 4
Item Description Qty.
C. Nut #10-24 4
D. Undershelf Slide 1
1. Unpack carton to confirm amount
and identity of components.
2. On the desired mounting level,
remove the shelf mat(s) to expose the
shelf framework.
3. Take the slide and position it under
the framework at the desired location.
NOTE: The keyhole slot must be
oriented toward the front of the
system (Fig. 1).
4. While holding the slide in place,
insert the offset end of the hanger
in the slot and drop the hooked
end over the beam (Fig. 2). Align
the holes in the hanger and
slide. Repeat procedure for the
other hangers.
Fig. 1
Fig. 2
A
B
C
LIST OF
COMPONENTS
For Assembly of the
MetroMax One-Piece
Undershelf Slide.
ASSEMBLY
INSTRUCTIONS
For MetroMax One-Piece
Undershelf Slide
®