Metro Starsys Workcenters Back Filler Kit - Manual

Part No. INST-BFLR30
Date: 10/09/01
WORKCENTERS
INSTALLATION
INSTRUCTIONS
Back Filler Kit - 30” Deep Countertops
1. Use the filler plate (Qty.2) as a template to
position unit relative to the wall.
2. Level base unit, attach to wall, and secure
countertops following the steps outlined in the
Starsys WorkCenters Installation Manual.
(Shipped in each base unit)
3. Align and mount the back extrusion (Qty. 2)
to wall - this may require trimming the extrusion.
(Mounting hardware not included)
4. Locate back edge of filler plate within the groove
of the wall-mounted extrusion.
5. Align holes in filler plate with back extrusion
groove as shown, fasten in place with screws
provided. (Qty. 6)
Note: Filler plates can be trimmed, punched, or
drilled to accommodate utilities as needed.