Metro Gliding Shelf - Manual

INSTRUCTIONS FOR USE
L01-421 RevC
03/13
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA USA 18705
For Product Information Call: 1-800-992-1776
Visit Our Web Site: www.metro.com
Information and specifications are subject to change
without notice. Please confirm at time of order.
*Save this document for future application, load rating and/or safety reference.
Gliding Shelf
Do not slide more than one shelf out at a time.
Do not climb on unit.
Unit must be attached to a wall: use the plastic bracket
provided and appropriate fastener for your wall
construction assuring to attach to wall stud. Be sure to
avoid hitting wire conduits or plumbing inside of wall.
(fasteners are not provided)
Unit must be assembled with regular (non-sliding)
shelves at the top and the bottom of the unit.
CAUTION: WEIGHT CAPACITY WARNING: Tipping Hazard
Parts
x1
x1
x4
45 kgs.
100 lbs.
Per Shelf Max.
Equally Distributed
Attach the back of the top
(non-sliding) shelf to stud
behind wall with bracket and
appropriate fasteners.
2 1
3
Note: Fastener not included. Appropriate
fastener determined/supplied by customer
based on wall construction.