Metro Unit-to-Unit Filler Kit - Manual

Part No. INST-UUTRIM
Date: 10/09/01
Unit-to-Unit Filler Kit
1. Measure the height of the gap between units to
be filled.
2. Cut filler strip to the appropriate size.
3. Remove paper backer from the back face of
adhesive strip.
4. Working from the top down, press filler firmly into
place between units.
5. Trim excess as required & repeat step #4.
Note: To assure proper adhesion, make sure
surfaces are clean prior to installation.
WORKCENTERS
INSTALLATION
INSTRUCTIONS