Dimplex V1525RT User Manual

Page 9

Figure 3

3. With a wall stud finder, locate the center of the

wall stud, drive a wood screw into stud and
leave approximately 1/8" exposed threads for
the fireplace to hang on.

4. The second mounting point should be picked

such that it is farthest (to the left or right)
relative to the first one among the seven
keyholes (A to G shown in figure 2) on the
fireplace for wall mounting, these keyholes
are 2" apart. For example, if you plan to use
hole B as the first mounting hole, the second
mounting hole must be G. Other available
combinations are A-G, C-G, A-F, A-E, A-D and
D-G.

5. Mark the second mounting screw location;

ensure that is level with the first with the help
of the provided bubble level and the fireplace
itself. Screw the threaded drywall anchor in
the drywall with a Philip’s head screwdriver
until the head is flat against the wall surface.
Caution should be taken when using a power

Air Circulation

This manual is related to the following products:

V1525BT