MEGAPOWER MVP-732 - Manual (Page 7)

Save Image
You can store up to 8 images in the digital presenter. When required these 8 images can be
retrieved one by one on screen.
Press " SAVE" or "STORE" button to store the current image into
the memory of the digital presenter. Each time the "SAVE" or
"STORE" button is pressed, another image is stored. When all
the 8 images are stored, the next saved image will overwrite the first image.
Note: due to the data size of the stored image, it may take up to 1-2 second to save one image.
Image Retrieval
Press "RECALL" button to display the stored image.
Press "RECALL" button to retrieve the stored images one after the other.
Press RECALL
11
Chapter 2
Installation
2.1 Structure
1. Pull the Main Lock Switch towards the front and pull the arm up to the preset position.
2. Lift up the two Goose Neck Upper Lamps.
1 2
4
Front View
CCD Camera Head
Media Card Slot
Goose Neck
Upper Light
Arm Lock Button
Arm
Control Panel
Infra Red Receiver Window
Close Up Lens
Main Lock Switch
Base Light
Original
Image Top half
side freeze Right hand
side freeze
Freeze Image
Press the "FREEZE" button to freeze the current image display.
Press the "FREEZE" button again to exit this mode.
Compare Image
Press "COMPARE" button to freeze image on the right hand side.
Press "COMPARE" button to freeze image on the top half and
press "COMPARE" button again to exit this mode.
FREEZE
Freeze
Freeze
Original
Image