Datavideo MP-6000 Mk2 - Manual (Page 42)

41
After a few seconds the message will change to READING, and after a few more seconds it will return to
the general display.
On the TV monitor you will see this message
With OK highlighted press the Enter button
The Format Progress bar will appear on the TV monitor
After about 20 seconds formatting will be complete and the
disc is ready for recording
Erasing a DVD+RW Disc
If you have an old DVD+RW Disc that you want to re-record as a new disc, i.e. you wish to remove all
previously recorded tracks and data from the disc, follow this procedure.
Press the Eject button, the message OPEN will be displayed on the LCD display, and the disc tray will
open.
Place a DVD+RW disc on the disc tray; label/printed side up.
Press the Eject button again, so that the tray retracts, and the CLOSE message appears.
After a few seconds the message will change to READING, and after a few more seconds it will return to
the general display.