Datamax 200MVP - Manual (Page 6)

www.bradyeurope.com
MVP Series Product Guide - 6 - Printer Overview
3. PRINT SPECIFICATIONS / REGISTRATION REQUIREMENTS
4.
USER INTERFACE CONTROLS AND INDICATOR LIGHTS
A MVP series printer is equipped with a standard LCD control panel for easy
user interface and operation. A 2-line, 16 character backlit display and tactile
feel buttons on the printer’s front panel enable users to fine-tune and control
their print settings, whenever needed, in dim or bright light from any angle.
The user can quickly make adjustments and configure the printer to meet the
specific needs of the application. Such adjustments can also be accomplished
without having to access a computer or software. The drawing of the MVP
series front panel (below) depicts the positioning of the indicator lights on the
200MVP/300MVP.
The LCD display is used in configuring the printer; selecting reports to be
printed by the Brady printer which identify available fonts, bar code
symbologies, images or formats stored in the printer; or a complete record of
the printer’s configuration settings; and diagnostic tests or security passwords.
The LCD display is also helpful in specifying error conditions and
communicating to the operator when the condition has been corrected.
Media Width: 1.0" (25mm) min. to 4.5" (114mm)
max. on 200MVP or 300MVP
Inter-Label Gap
(Distance between labels): 0.08" (2mm) to 0.16" (4mm)
(0.10" -.125” 2.5mm- 3.2mm
Recommended)
First Dot Location: 0.10" (2.5mm, not to exceed
–0.5/+1.0mm) from inside edge of the
media ±0.04mm
Vertical Registration Drift: Not to exceed ± 0.0393" (1.0mm)
Horizontal Registration
Drift: Not to exceed ±0.0591" (1.5mm)
Longitudinal Drift
± 0.0393" (1.0mm) (with respect to
media type) (between any two labels
printed from the same label roll)
Variation (from leading label edge to marking):
0.0393" (1mm)
Media Thickness 0.0023" (0.058mm) to 0.010"
(0.25mm); die-cut labels, tickets and
tags. 2.3 mils to 12 mils
Label Roll Size: 8.0" (203mm) O.D. max. / 3.0"
(76mm) I.D. min.
Tear-Off Bar: Standard
Ribbon Orientation: Ink Side Out