Measurement Computing WBK14 - Manual (Page 4)

WBK14, pg. 4 988396 WBK14, Dynamic Signal Input Module
Hardware Setup
CAUTION CAUTION CAUTION CAUTION
If the following two conditions exist simultaneously:
• operating WBK14s in a configuration of 4 or more modules
• ambient temperature >40°C;
then you must mount the modules on their side (vertically) to facilitate air flow through the
side plates. Failure to due so could result in thermal-related problems.
Configuration
All WBK14 configurations are controlled by software. The WBK14 requires no hardware settings.
Reference Notes:
➣
Setup information pertaining to power, expansion control, and expansion signal connections
is contained in the chapter
System Setup and Power Options, in the WaveBook User’s
Manual (p/n 489-0901).
➣ For detailed WaveView information, refer to the WaveView document module. The
document can be accessed from the data acquisition CD via the button on the
opening screen.
Power
Like the WaveBook, the WBK14 contains an internal power supply. The unit can be powered by an
included AC power adapter or from any 10 to 30 VDC source, such as a 12 V car battery. For portable or
field applications, the WBK14 and the WaveBook can be powered by the DBK30A rechargeable battery
module or the DBK34 uninterruptible power supply (UPS) / battery module.
You must compute power consumption for your entire system and (if necessary) use
auxiliary or high-current power supplies.
Reference Note:
For details regarding power, refer to the chapter,
System Setup and Power Options , in the
WaveBook User’s Manual (p/n 489-0901).
Assembly
The WBK14 shares the same footprint as other WBK modules and WaveBooks, allowing for convenient
mounting. A fastener panel allows multiple units to be stacked vertically. Screw-on handles are available for
portable applications. For more assembly information refer to this manual’s introduction.