Measurement Computing DaqScan 2000 Series - Manual (Page 37)

DaqLab/2000 Series & DaqScan/2000 Series 947091 Configuring the System for Operation 6-3
Dedicated Network - making use of a network hub or switch
In the following figure a DaqLab/2000 Series device is connected to the Ethernet through a
network hub/switch. At least one computer is also connected to the hub. DaqScan/2000
series devices can be connected directly to the hub/switch in the same manner.
Dedicated Network using a Hub/Switch
Some network devices such as a wireless access point may act as a DHCP
server. If this is the case, follow the instructions for the LAN with a DHCP
server. For detailed information consult the documentation that is specific
to your network device.
LAN with a DHCP Server
(Local Area Network with a Dynamic Host Configuration Protocol server)
Many corporations use the LAN/Server with DHCP arrangement for their networks. In
this type of setup several computers are typically connected to a network that makes use
of a DHCP server. In addition, the primary data acquisition device, e.g., DaqLab/2001, is
connected to the network hub/switch.
LAN with a DHCP Server