Measurement Computing PCI-PDISO8 - Manual (Page 9)

PCI-PDISO8 User's Guide Installing the PCI-PDISO8
9
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections. This document is available on our web site at
www.mccdaq.com/signals/signals.pdf .
Signal termination
You can use the following screw terminal board with the C37FF-x cable:
 CIO-MINI37 – 37-pin screw terminal board.
 SCB-37 – 37-conductor, shielded signal connection/screw terminal box.
Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx .
Caution! Do not use exposed-screw terminal boards if your field voltage is more than 24 volts. Using a
screw terminal board with high voltage inputs or outputs exposes you and others to those high
voltage signals. Construct a safe cable to carry your signals directly from your equipment to the
PCI-PDISO8 connector.
Additional information about digital interfacing
Detailed information about digital interfacing is contained in the Guide to Signal Connections. This document is
available on our web site at
www.mccdaq.com/signals/signals.pdf .