Chapter 8, Create a new logger settings file – Measurement Computing DAQLog User Guide User Manual
Page 39
39
Chapter 8
DAQLog Walkthrough: Logging Data with a LGR-5320
Series Device
This chapter provides a step-by-step walkthrough of how to configure a LGR-5320 Series device using DAQLog,
and then log data with the device using the configuration.
This example logs data from a single analog channel (AIO), and logs an event when the
TRIG/EVENT
button on the
device is pressed.
This chapter assumes you have already completed the steps in the “Getting Started” chapter on page 9.
Create a new logger settings file
Follow these steps to create the settings file.
1. Click the
New Settings File
icon from the DAQLog toolbar.
2. On the
New Log Settings--Configuring Logging Session…
dialog:
o
Select LGR-5327 from the
Settings Target
listbox.
o
Enter AI0 SE in the
Name
field.
o
Enter DAQLog walkthrough that logs one analog channel and records button press events in the
Notes
field, and click
Next>>
.