Measurement Computing DAQ Quick Start - Manual (Page 6)

Install the MCC DAQ Software
6
Install the MCC DAQ Software
The MCC DAQ Software installation program consists of a series of
easy-to-follow dialog boxes that lead you through the installation procedure.
To install the MCC DAQ Software, complete the following steps:
1. Insert the MCC DAQ Software CD in your CD drive and wait for the
installation program to start.
If the installation program does not start automatically, use Windows
Explorer to browse to the root of the CD, and double-click
Install.exe .
The MCC DAQ dialog box opens.
All software packages are selected for installation if the requirements for
the package are met. If you do not want to install a software package,
clear its checkbox.
The
Required dependencies pane lists the software packages needed to
run each MCC DAQ Software package.
Adobe Reader - Adobe Reader is required to open the hardware user's
guides.
Microsoft .NET framework - The .NET Framework 2.0 is required to
install TracerDAQ, ULx for NI LabVIEW, and the hardware user's
guides.
If the framework is not detected on your computer, this package is listed
and the checkbox is selected. Measurement Computing recommends that
you leave the
Microsoft .NET framework checkbox selected.
2. Click Install and follow the instructions on the installation dialog boxes.
The installation program automatically installs each selected software
package. You are prompted to restart your computer after installing all of
the selected packages.