Measurement Computing CIO-DDA06/JR - Manual (Page 12)

CIO-DDA06/JR User's Guide Installing the CIO-DDA06/JR
All the digital outputs inputs on the CIO-DDA06/JR connector are TTL level. Before connecting external
devices, review the specifications in this manual to avoid damage to the CIO-DDA06/JR.
Cabling
20
1
37
19
20
1
37
19
The red stripe
identifies pin # 1
Figure 5. C37FF-x cable
20
1
37
19
20
1
37
19
Figure 6. C37FFS-x cable
Field wiring, signal termination, and conditioning
You can use the following cabling, screw termination, and signal conditioning products with the CIO-
DDA06/JR.
ƒ
DFCON37 – Connector kit that includes a 37-pin female D-connector, D-shell, 37 crimp pins, and cable
termination kit to construct your own cable.
ƒ CIO-MINI37 – 37-pin screw terminal board.
ƒ CIO-TERMINAL – 37-pin screw terminal board with on-board prototyping area.
ƒ CIO-SPADE50 — 16" X 4" termination panel which mates with both 37-pin and 50-pin connectors.
ƒ SCB-37 – 37-conductor, shielded signal connection/screw terminal box.
ƒ SSR-RACK24 – 24-channel, solid-state relay mounting rack for digital signal conditioning.
ƒ ENC-MINI37– Enclosure for the MINI37.
12