Mega Catch MCU-800 Ultra - Manual (Page 10)

8
The Mega-Catch™ Trolley has been designed
to hold a 20lb (9kgs) CO
2
Gas Cylinder for use
in conjunction with the ULTRA Trap.
If you wish to install a Mega-Catch™ Mosquito
Trap on a Mega-Catch™ Trolley without a CO
2
Gas Cylinder in place then the handle on the
Trolley should be reversed. We also recommend
that a stability weight (e.g. a cement/cinder
block of at least 10lbs (4.5kg) be placed on the
Trolley in the manner shown in figure 2.4 below.
While your Mega-Catch™ Trolley is zinc-plated
and powder-coated, when not in use, we
recommend that it be stored out of the weather.
FIG. 2.2 Trolley assembly
Complete with CO2 cylinder
and transformer installed
FIG. 2.3 Trolley assembly
Complete with
weatherproof
cover fitted
FIG. 2.4 Trolley assembly option
For use without CO
2
gas cylinder
Fit trolley handle
opposite to normal so
that trap unit hangs
over stability weight