D-Link DI-774 - Manual (Page 83)

83
Frequently Asked Questions (continued)
What are virtual servers?
A Virtual Server is defined as a service port, and all requests to this port will be
redirected to the computer specified by the server IP. For example, if you have an FTP
Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN
server at 192.168.0.7, then you need to specify the following virtual server mapping
table:
Server Port Server IP Enable
21 192.168.0.5 X
80 192.168.0.6 X
1723 192.168.0.7 X
How do I use PC Anywhere with my router?
You will need to open 3 ports in the Virtual Server section of your D-Link router.
Step 1
Open your web browser and enter the IP Address of the router (192.168.0.1).
Step 2
Click on Advanced at the top and then click Virtual Server on the left side.
Step 3
Enter the
information as seen
below. The Private IP is
the IP Address of the
computer on your local
network that you want to
connect to.
Step 4
The first entry
will read as shown here:
Step 5
Click Apply
and then click Continue.