D-Link DI-774 - Manual (Page 25)

25
Using the Configuration Menu (continued)
Advanced > Filters > IP Filters
Filters are used to deny or allow LAN (Local Area Network) computers from accessing
the Internet. The DI-774 can be setup to deny internal computers by their IP or MAC
addresses. The DI-774 can also block users from accessing restricted web sites.
This is the schedule of time when the IP Filter will be enabled. Schedule-
Select the protocol type Protocol Types-
The single port or port range that will be denied access to the
Internet. Port-
Use IP Filters to deny LAN IP Addresses from accessing the
Internet. You can deny specific port numbers or all ports for
the specific IP Address. IP Filters-
The IP Address of the LAN computer that will be denied
access to the Internet. IP-