MBM Corporation BC 12 - Manual (Page 33)

31
6. Handling the Trash Box
∗ While cutting is in progress, cut strips are collected in the trash box.
∗ When the box becomes too full with margins, some may gather around the cutter and could cause a
paper jam. Frequently empty the strips from the trash box (after cutting approximately 50 sheets of
letter-size and legal-size paper).
7. Power Off
∗ When cutting work is finished, turn off the power switch.
∗ If the machine will not be used for many hours, remove the power plug from the outlet.
Do not remove the transparent cover of the trash box, as it is part of the cover of the
slitter cartridge.
WARNING
If you notice a strange sound or smell while the machine is operating, turn off the
power switch immediately, remove the power cord plug, and contact your dealer for
inquiries/repairs.
WARNING
When the trash box is pulled out, do not put your hand inside the machine from under
the slitter cartridge. When the trash box is pulled out, the safety device works and the
machine stops, but the blade in the back could injure your fingers.
WARNING