MBM Corporation ES 8000 - Manual (Page 9)

User Manual ES8000
8
OP Panel
Operation
1. Start/Stop button: starts and stops the machine. If you press during setting, it returns to
the prior condition.
2. Set/Store button: sets and stores the selected function.
3. Mode button: enters to mode function.
4. Count button: enables you to set the number of forms that you wish to process and
have the machine stop automatically until you press the start button.
- Press the counter button and the light will blink.
- Change the displayed value by using select button and when ready, press the set button.
- When changing the value, press batch counter button to increase the value by 50 up to 500.
- This setting is not stored after rebooting the machine.
5. Select button: selects yes/no or increase/decrease numerical value when you set.
6. Count reset button: clears the count on the display panel.
7. Thickness Sensor button: protects the double or multiple feeding by sensing the
characteristics of paper.
8. Jam free button: automatic removal of paper jam at folding roller or press roller.
9. Auto start button: re-starts the process after selected time when the job reaches
preset count.