Mathey Dearman Saddle Machine Contour Cutting Attachment - Manual (Page 5)

5
8.0 – TEMPLATE INSTALLATION TO SHORT SADDLE CUTTING & BEVELING
MACHINE
Read all instructions prior to assembly.
Tools Required:
MSA- 3/8” ratchet, 8” extension bar and 7/16” socket
1SA – 8SA – 3/8” ratchet, 8” extension bar and 1/2” socket
Use caution when working with the Mathey Saddle Machine, Contour Cutting Attachment and Template to not over torque the Hex Head
Cap Screws, as all major components of the pipe machine and contour cutting attachments are made of aluminum.
WARNING: When installing the Shape Template on the Saddle Machine, only loosen the Hex Head Cap Screws in the cap ring that
are specified. It may affect the accuracy of the machine if ALL Hex Head Cap Screws are loosened at once.
Note: During shipping the templates can be knocked out of round; therefore, some force to round the templates may be required for
alignment of attachment holes of the template to the cap ring of the Saddle Machines.
SADDLE, CAP RING & RING GEAR ASSEMBLY