Mathey Dearman Saddle Machine Contour Cutting Attachment User Manual
Page 3
3
1.0 – CONTOUR CUTTING ATTACHMENT (03-0116-MSA or 03-0116-MSAE)
FOR MSA SADDLE PIPE MACHINE
1.1 The attachment can be used with a manual or motorized MSA Pipe Beveling Machine to cut profiles and miter angles to 45
degrees on 1
1
/
2
” - 4” / 38-102mm pipe.
1.2 The Attachment can be used with a plasma or fuel torch having a barrel diameter of 1 3/8” / 35mm.
2.0– CONTOUR CUTTING ATTACHMENT (03-0116-1SA or 03-0116-1SAE)
FOR THE 1SA, 2SA, & SUPER “II” PIPE MACHINE
2.1 The attachment can be used with a manual or motorized Pipe Beveling Machine to cut profiles and miter angles to 45 degrees
on various diameters of pipe.
2.2 The Attachment can be used with a plasma or fuel torch having a barrel diameter of 1 3/8” / 35mm.
2.3 1SA Pipe Beveling Machine with Contour Cutting Attachment cuts various profiles and miter angles to 45 degrees on 3” – 8”
pipe.
2.4 2SA Pipe Beveling Machine with Contour Cutting Attachment cuts various profiles and miter angles to 45 degrees on 6” to
12” pipe.
2.5 Super “II” Pipe Beveling Machine with Contour Cutting Attachment cuts various profiles and miter angles to 45 degrees on
4” to 12” pipe.
NOTE 1 - Mathey Dearman Inc. can not insure proper operation of the Contour Cutting Attachment on 1SA and 2SA Saddle
Machines manufactured prior to 1989.
3
.0 – CONTOUR CUTTING ATTACHMENT (03-0116-3SA or 03-0116-3SAE)
FOR THE 3SA SADDLE MACHINE
3.1 The attachment can be used with a manual or motorized 3SA Pipe Beveling Machine with Contour Cutting Attachment to cut
various profiles and miter angles to 45 degrees on 12” to 20” pipe.
3.2 The Attachment can be used with a plasma or fuel torch having a barrel diameter of 1 3/8” / 35mm.
NOTE 1 - Mathey Dearman Inc. will not insure proper operation of the Contour Cutting Attachment on 3SA Saddle Machines
manufactured prior to 1989.
4
.0 – CONTOUR CUTTING ATTACHMENT (03-0116-4SA or 03-0116-4SAE)
FOR THE 4SA SADDLE MACHINE
4.1 The attachment can be used with a manual or motorized 4SA Pipe Beveling Machine with Contour Cutting Attachment to cut various
profiles and miter angles to 45 degrees on 20” to 26” pipe.
4.2 The Attachment can be used with a plasma or fuel torch having a barrel diameter of 1 3/8” / 35mm.
5.0 – CONTOUR CUTTING ATTACHMENT (03-0116-5SA or 03-0116-5SAE)
FOR THE 5SA SADDLE MACHINE
5.1 The attachment can be used with a manual or motorized 5SA Pipe Beveling Machine with Contour Cutting
Attachment cuts various profiles and miter angles to 45 degrees on 24” to 30” pipe.
5.2 The Attachment can be used with a plasma or fuel torch having a barrel diameter of 1 3/8” / 35mm.
6.0 – CONTOUR CUTTING ATTACHMENT (03-0116-6SA or 03-0116-6SAE)
FOR THE 6SA SADDLE MACHINE
6.1 The attachment can be used with a manual or motorized 6SA Pipe Beveling Machine with Contour Cutting Attachment cuts
various profiles and miter angles to 45 degrees on 28” to 36” pipe.
6.2 The Attachment can be used with a plasma or fuel torch having a barrel diameter of 1 3/8” / 35mm.
7.0 – CONTOUR CUTTING ATTACHMENT (03-0116-8SA or 03-0116-8SAE)
FOR THE 8SA SADDLE MACHINE
7.1 The attachment can be used with a manual or motorized 8SA Pipe Beveling Machine with Contour Cutting Attachment cuts
various profiles and miter angles to 45 degrees on 40” to 48” pipe.
7.2 The Attachment can be used with a plasma or fuel torch having a barrel diameter of 1 3/8” / 35mm.