Mathey Dearman CGM Cold Cutting System - Manual (Page 33)

33
TABLE 2 – CGM TRANSMISSION (part 2)
Item N° Description
Drawing
REF. N°
Part Number
30 Socket Head Cap Screw, M 8 x 25 05-5500-030
-- ---------------------------------------------------------------- -------------------
31 Atlas Copco Pneumatic Motor Flange 05-5500-031A
32 Socket Head Cap Screw, 5/16 x 20 05-5500-032
33 Flange FT.053 05-5500-033
34 Socket Head Cap Screw, M 6 x 20 05-5500-034
35 Packing Ring, DH 37 x 47 x 4 05-5500-035
36 Roller Bearing, NK 37/20 A 05-5500-036
37 Snap Ring, Diameter 47mm 05-5500-037
38 Bearing, SKF 6007 05-5500-038
39 Spacer FT.005 05-5500-039
40 Cutter Spindle FT.051 05-5500-040
41 Packing Ring, Nilos 3200Av 05-5500-041
42 Key, B 10 x 8 x 45 05-5500-042
43 Key, B 10 x 8 x 25 05-5500-042
44 Flange FT.030 05-5500-044
45 Metal Packing, OR 3193 05-5500-045
46 Packing , BAU 4 05-5500-046
47 Flange FT.071 05-5500-047
48 Cutter Drive Collar, Male FT.042 05-5500-048
49 Cutter Drive Collar, Female FT.043 05-5500-049
50 Hardened Pin, 10 x 60 (used in item 48) 05-5500-050
51 Cutter Lock Nut FT.062 05-5500-051
52 Cutter Drive Collar, Female FT.044 05-5500-052
53 Hydraulic Motor, OMP 80 DNFS 05-5500-053
89 Socket Head Cap M 8 x 20 05-5500-089
139 Grease Zerk, 1/4" 05-5500-139
445 Column Tensioning Block 05-5500-445
446 Screw, Column Tensioning M6 X 50 05-5500-446
447 Screw, Mounting M6 X 20 05-5500-447