Mathey Dearman CGM Cold Cutting System User Manual
Page 3
3
1 GENERAL INFORMATION
This Parts and Operating Manual is a guide for the use and maintenance of the PNEUMATIC MODEL CGM-1 “A”
PIPE CUTTING BEVELING MACHINE and HYDRAULIC MODEL CGM-1 “O” PIPE CUTTING
BEVELLING MACHINE made by:
C.I.A. MATHEY ITALIANA S.r.l.
VIA ISONZO 26-20050 S. DAMIANO di BRUGHERIO-MILANO
Phone: 39039-831019 or 39039-2020021 Fax: 39039-2020079
This Parts and Operating Manual is supplied with the machine and placed in the steel carrying case at the time of
shipment. A copy of the Parts and Operating Manual can also be obtained on the internet The
manual should be read and understood by all operators prior to attempting the operation of the CGM-1. The manual
should be stored in a dust and humidity free environment that is easily accessible to the operator for consultation.
Maintenance personnel and purchasing staff should consult the manual prior to attempting any maintenance of ordering
spare part or for any questions concerning Warranty.
Please have the following information available when requesting a manual:
Type of Machine
Production Number
Supplier
Customer Name and Address
Address to Deliver the Copy of the Manual
This Manual reflects that the CGM-1 and/or manual is “The State of The Art” at the moment of sale and it can not be
considered inadequate if the unit has been updated due to new technology. The producer is not obligated to update the
manuals of previously sold machine, if due to new advances in technology and if the machine is modified and/or
improved.
Please inform Producer of any changes in order to provide the new owner with up to date information if the machine has
been altered by anyone other than the manufacturer.
Please contact C.I.A. MATHEY ITALIANA S.r.l. or MATHEY DEARMAN, INC. with any suggestions on how to
improve the equipment or its performance.
1.1 Installation and use
2
The user is responsible for installing and using the CGM Cold Cutting Equipment according to the manufacturers
instructions. The operator should read and understand the parts and operating manuals prior to attempting operation
of the CGM.
It shall be the responsibility of the user to resolve any situation with the technical assistance of the manufacturer.
2.1 Assessment of Area
Before installing the equipment the shall make an assessment of the problems in the surrounding area.
2.2 Maintenance of the cutting equipment
The cutting equipment must be routinely maintained according to the manufacturer’s recommendations. The cutting
equipment should not be modified in an way.
2.3 Warning
Genuine Mathey Dearman parts are the factory-recommended replacement parts for the CGM Machine. Any
damage caused by the use of other than genuine Mathey Dearman parts may be covered by the Mathey Dearman
Warranty.
Warning
You are responsible for the safe use of the product. Mathey Dearman does not and cannot make any guarantee or
warranty regarding the safe use of Product in your environment.