Marantz NA7004 - Manual (Page 15)

12
ENGLISH
Getting Started
Connections
Basic Operations Basic Operations
Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
cations
Index
USB memory device playback
Playing back music or fi les recorded on a USB memory device.
n USB memory (vpage 30)
Playing fi les stored on USB memory
devices
1 Playback preparation (vpage 11 “Before playing a
USB or an iPod”).
2 Use ui to select the search item or folder, then
press [ENTER/MEMO] , or p .
3 Use ui to select the fi le, then press [ENTER/
MEMO] , , p or 13 .
Playback starts.
• If the USB memory device is divided into multiple partitions, only the
top partition can be selected.
• This unit is compatible with MP3 fi les conforming to “MPEG-1 Audio
Layer-3” standards.
NOTE
• Note that Marantz will accept no responsibility whatsoever for any
problems arising with the data on a USB memory device when using
this unit in conjunction with the USB memory device.
• USB memory devices will not work via a USB hub.
• Marantz does not guarantee that all USB memory devices will
operate or be supplied power. When using a USB portable hard disk
that can draw power from an AC adapter, we recommend using the
AC adapter.
• It is not possible to connect and use a computer via the USB port
(Type A) of this unit using a USB cable.
n USB operation
Operation buttons Operation on this unit
13 Play the track / Pause the track.
8 , 9 Play the track from the beginning/Play the next track.
u , i Select an item.
ENTER/MEMO
or p
Enter the selection or plays the track.
REPEAT Switch the repeat function
o Display the menu or return to the previous menu.
2 Stop the track.
SEARCH Character search z
HOME Return to top menu
• Playing repeatedly (Repeat playback) (vpage 11)
z Press [SEARCH] , then press o p to select the fi rst letter you want
to search mode.
If the list is not in alphabetical order, you may not be able to
perform a character search.
n To switch the display
During playback, press DISPLAY .
Artist name
Album name
File type/Bitrate
iPod® playback
Playing random order (Random playback)
1 In the stop mode, press [RANDOM] .
The “ ” is displayed.
2 Press 13 .
The tracks start playing in random order.
If [REPEAT] is pressed during random playback, after the current
session of random playback is fi nished, another session in a different
order of tracks starts. (Direct mode only)
n Canceling random playback
While stopped, press [RANDOM] .
The “ ” turns off.
n To switch the display
During playback, press DISPLAY .
The display switches each time the button is pressed.
Artist name
Album name
Disconnecting the iPod
1 Press ON/STANDBY to set the standby mode.
2 Disconnect the iPod cable from the USB port.
1.NA7004U_ENG_2nd_100831_校了.indd 12 1.NA7004U_ENG_2nd_100831_校了.indd 12 2010/08/31 20:31:24 2010/08/31 20:31:24