beautypg.com

Basic operation, Listening to the tuner, English – Marantz SR-14mkII User Manual

Page 25

background image

ENGLISH

18

2. FUCTION SELECT & SURROUND MODE

When a function or surround mode button is selected:

VIDEO:

Displays the current video source. When DSS/TV, LD,
DVD, VCR or AUX is selected with the function selector,
both AUDIO and VIDEO shows the same name.

AUDIO:

Displays the current analog audio input source.

DIGITAL:

Displays the current digital input source.

SURR-MODE:

Displays the current Surround mode as follows;

AUTO, DOLBY, THX 5.1, THX Sur. EX , DTS CINEMA,
DTS MUSIC, HALL, MATRIX, MOVIE, 5-STEREO,
STEREO, MONO, S-DIRECT,

or

6CH-INPUT

.

3. MASTER VOLUME CONTROL

Displayed when the MASTER volume is varied or a button of the
remote handset is pressed.
The box display indicates the 0 dB level with a solid box “ ”.

4. MUTE

When the

MUTE

button is pressed on the remote control, “MUTE” will

be shown on screen. Pressing

MUTE

button again will clear the

display, or adjust the volume.

5.SLEEP TIMER

When the

SLEEP

button is pressed, the setting on or off and the

remaining time of the sleep timer function are displayed.
You can change the mode between on, off and the amount of time to
elapse before the unit will shut itself off by cycling the sleep button.

I

O

U

:

D

D

:

D E
D

O

I

L

I

A

G

T

I

V
A
D

:

D G – 5

D

V D

S U

R

R

M O D E

:

T

I

V

S C

I N E

D

L

L F E

E V E L

:

1 0

d B

MA

A

M S T E R

V O U M E

L

– – – –

– – – – – – –

– –

– – –

M U T E

S L E E P

T M E R

I

O N

9 0 m i n

BASIC OPERATION

LISTENING TO THE TUNER

Frequency scan step for AM is selectable. Default is 10 kHz step. If
your country’s standard is 9 kHz step, press “AM” button on the
remote more than 6 seconds. Scan step will change.

Note:

• Memory for the tuner will clear by this setup.

MANUAL TUNING

1.

To select the tuner as the source, turn the

INPUT SELECTOR

knob

!5 on the front panel or press the

Tuner

button on the remote.

2.

Press the

BAND

button y on the SR-14mkII or

AM/FM

buttons

on page of Tune mode on the remote to select the desired
frequency band.

3.

Press the

AUTO TUNING

button !7 on the SR-14mkII to display

the frequency.

4.

Turn the

GYRO TUNING

knob @1 on SR-14mkII or press

< , >

button on page of Control mode on the remote.

5.

If FM is selected, press the

FM MODE

button u on the front panel

or the

Mono

buttons on page of Tune mode on the remote to

select the desired audio mode.

AUTO TUNING (USING THE SR-14MK

II

)

Light up the “AUTO TUN” indicator by pressing the

AUTO TUNING

button !7 and turn the

GYRO TUNING

knob @1.

AUTO TUNING (USING THE REMOTE CONTROL UNIT)

The

< , >

button is pressed for more than 1 second to start Auto

tuning function.

(FM) MODE Button Operation

When “AUTO” indicator is on in the display, FM stations which
broadcast in stereo will be received in stereo and the “STEREO”
indicator lights.
When “AUTO” indicator is off, all the FM stations will be received in
monaural regardless of whether or not they are broadcasting in
stereo.

PRESET TUNING

With this unit you can preset up to 50 FM/AM stations in any order.
For each station, you can memorize the frequency and reception
mode if desired.

1-a. Manual Presetting (Using the SR-14mk

II

)

1.

Refer to the “

MANUAL TUNING

” or “

AUTO TUNING

” section

above to tune in a desired station.

2.

Press the

MEMO

button i. “MEMO” indicator starts blinking on

the display. While “MEMO” is still blinking (approx. 5 seconds),
select the preset number by turning the

GYRO TUNING

knob @1,

then press the

MEMO

button again.

3.

When a number has been properly input, “MEMO” indicator
stops blinking and goes out. The station is now stored in the
specified preset memory location.

1-b. Manual Presetting (Using the remote unit)

1.

Tune in a desired station.

2.

Press the

M

button on page at Keypad mode.

3.

Enter the desired preset number with

ten keypad

on page of

Keypad mode.
* When entering a single digit number (2, for example), either
input “02” or just input “2” and wait for a few seconds.
* If a number other than 1-50 is entered by mistake, that number
flashes in the display to indicate that it is invalid and the display
returns to the original frequency display.