Marantz M-CR502 User Manual
Page 23

19
NAMES AND FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADV
ANCED OP-
ERA
TIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
ADV
ANCED
OPERA
TIONS
ENGLISH
LISTENING TO TRACKS IN A SPECIFIED
ORDER
• Your favorite tracks among those recorded on a
CD or located in a given MP3/WMA music file can
be played in your favorite order.
• Up to 40 tracks can be specified.
• Be sure to specify track order while playback is
stopped.
• No more than 999 file numbers can be registered
for USB program mode.
2.
3.
5.
4.
1.
7.
4.
2.
3.
5.
4.
1.
7.
4.
2.
3.
5.
4.
1.
7.
4.
1.
Stop CD or MP3/WMA playback by pressing
the
7 button on the remote controller.
2.
Press the PROGRAM button on the remote
controller.
3.
Press the ENTER button on the remote
controller.
4.
Enter the track number that you want
to program using the ∞/§ or numeric
buttons on the remote controller.
5.
Confirm by pressing the ENTER button on
the remote controller.
6.
Enter track numbers by repeating Steps
4.
and
5.
7.
To complete program settings, press the
ENTER button on the remote controller.
The total time of specified tracks is
displayed.
ADVANCED OPERATIONS
8.
Press the 2 button on the remote controller
or the
6 button on the unit to play your
favorite specified track.
Note:
The specified track order is canceled upon reset or
when the tray is opened or closed.
CANCELING SPECIFIED TRACKS
1. 3.
2.
1.
Press the
7 button while a program is
playing to stop playback of a track and put
the unit into program input standby status.
2.
Select the program number that you want
to delete using the ∞/§ or numeric buttons
on the remote controller.
3.
Cancel the specified program number by
pressing the
7 button.
• All specified programs can be canceled
by holding down the
7 button for 3
seconds during program input standby
status.
Note:
In USB program mode, specific program numbers
cannot be deleted.
Delete all programs by pressing the
7 button for 3
or more seconds.
CHANGING THE TRACKS REGISTERED
FOR PROGRAM PLAY
3.
5.
1.
2.
4.
3.
5.
1.
2.
4.
1.
Press the
7 button while a program is
playing to stop playback of a track and put
the unit into program input standby status.
2.
Select the program number that you
want to change using the ∞/§ or numeric
buttons on the remote controller.
M-CR502N_01_ENG.indd 19
08.8.7 5:28:33 PM