D-Link DMP-CD100 User Manual
Page 17
10
Notes: This function is not compatible with normal CD.
REMOVING THE DISC
1. After pressing the STOP button, wait for the disc to
stop rotating before sliding the DOOR OPEN switch
to remove the disc.
2. Hold the disc by the edge while slightly pressing on
the center spindle, then lift from the edge to release
and remove the disc.
HANDLING COMPACT DISCS
The DMP-CD100 is designed to
play CD/CD-R bearing the correct
identification logos. Other discs
may not conform to the CD/CD-R
standard and may not play properly.
Dirty, scratched or warped discs
may cause skipping or noise.
Handle the disc only by the edges.
To keep clean, do not touch its
surface. Discs should be stored in