D-Link DMP-CD100 User Manual

Page 15

running out of lines in the tank.
4. In case of excessive vibration, the memory data may be exhausted and the
Electronic Shock Protection (ESP) may become temporarily ineffective.
NOTE: The battery power consumes more quickly when the Electronic Shock
Protection control is used. It is therefore recommended to set the ESP control
off when the DMP-CD100 is used in a place free of vibration.

ADVANCED PLAYING MODES

INTRO PLAY (INTRO)
1. Press the STOP button until the total track
number and total plays time appears on the
display.
2. Press the REPEAT/MODE button until the
Intro Indicator (INTRO) flash on the display.
3. Press the PLAY / PAUSE button to start
playing the Intro mode.
4. The disc will then begin playing the first ten
seconds of all tracks once and then stops
automatically.

PROGRAM PLAY (PGM)
1. Press the PROGRAM button until you see the
Program Indicator (PGM) flashing on the display.

2. Press the FORWARD OR REVERSE SKIP /
SEARCH button to select the desired track
number.
3. Press the PROGRAM button to store the track
number into that memory location. The next
memory location will flash on the display.
4. Repeat Steps 2 and 3 to store up to 22 tracks.
5. Press the PLAY / PAUSE button to start the
program play.
6. When the last programmed track has finished
playing, the DMP-CD100 will stop
automatically.
TO VIEW THE PROGRAMMED CONTENTS