Marantz NR1506 - Manual (Page 152)

o HDMI
Set this to change the HDMI input connectors assigned to the input
sources.
1 / 2 / 3 / 4 / 5 /
FRONT:
Assign an HDMI input connector to the
selected input source.
– :
Do not assign an HDMI input connector
to the selected input source.
0 When “HDMI Control” is set to “On” in the menu, “HDMI” cannot be assigned
to “TV Audio”. (v p. 145)
0 No information on changing the volume or sound mode is displayed when the
4K signal is input.
o DIGITAL
Set this to change the digital audio input connectors assigned to the
input sources.
COAX (Coaxial) /
OPT (Optical):
Assign a digital audio input connector to
the selected input source.
– :
Do not assign a digital audio input
connector to the selected input source.
o ANALOG
Set this to change the analog audio input connectors assigned to the
input sources.
1 / 2 / 3:
Assign a analog audio input connector to
the selected input source.
– :
Do not assign a analog audio input
connector to the selected input source.
o VIDEO
Set this to change the composite video input connectors assigned to
the input sources.
1 / 2 / 3:
Assign the video input connector to the
selected input source.
– :
Do not assign a video input connector to
the selected input source.
o Set Defaults
The “Input Assign” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix
152
Front panel Display Rear panel Remote Index