Marantz NR1403U - Manual (Page 31)

28
Playback (Basic operation)
Settings ( vpage 21 )
n Turning the power on ( vpage 28 )
n Selecting the input source ( vpage 28 )
n Adjusting the master volume ( vpage 29 )
n Turning off the sound temporarily ( vpage 29 )
n Playing a Blu-ray Disc player/DVD player
( vpage 29 )
n Playing a CD player ( vpage 29 )
n Listening to FM/AM broadcasts ( vpage 30 )
Selecting a listening mode (Sound Mode)
( vpage 38 )
Connections (Advanced connection) ( vpage 48 )
Playback (Advanced operation) ( vpage 49 )
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press ON/STANDBY X to turn on
power to the unit.
The power turns on.
You can also switch the power to standby by pressing X ON/
STANDBY on the main unit.
n When power is switched to standby
Press ON/STANDBY X .
GSTANDBY indicator status in standby modeH
• Normal standby : Red
• When “HDMI Control” (
vpage 65 ) is set to “On” : Orange
Selecting the input source
Press the input source select button
( CBL/SAT , DVD , Blu-ray , GAME ,
AUX , MEDIA PLAYER , CD , TV AUDIO ,
FM , M-XPort or AM ) to be played
back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Using the button on the main unit
Turn INPUT SELECTOR .
• Turning INPUT SELECTOR switches the input source, as shown
below.
GAME AUX
MEDIA PLAYER CD TUNER TV AUDIO M-XPort
Blu-ray DVD CBL/SAT
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
Basic v
ersion
DVD