D-Link DIR-615 - Manual (Page 30)

30 D-Link DIR-615 User Manual
Section 3 - Configuration
Check the box to enable the wireless function.
If you do not want to use wireless, uncheck the
box to disable all the wireless functions.
Service Set Identifier (SSID) is the name of your
wireless network. Create a name using up to 3
characters. The SSID is case-sensitive.
The Auto Channel Scan setting can be selected
to allow the DIR-615 to choose the channel with
the least amount of interference.
Indicates the channel setting for the DIR-615.
By default the channel is set to 6. The Channel
can be changed to fit the channel setting for an
existing wireless network or to customize the
wireless network. If you enable Auto Channel
Scan, this option will be greyed out.
Select one of the following:
802.11g Only - Select if all of your wireless
clients are 80.11g.
Mixed 802.11g and 802.11b - Select if you
are using both 80.11b and 80.11g wireless
clients.
802.11b Only - Select if all of your wireless
clients are 80.11b.
802.11n Only - Select only if all of your wireless clients are 80.11n.
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 80.11n, 11g, and 11b wireless clients.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 80.11n and non-80.11n wireless devices.
20MHz - Select if you are not using any 80.11n wireless clients.
Enable Wireless:
Enable Auto
Channel Scan:
Manual Configuration
Wireless Network
Name:
Wireless Channel:
802.11 Mode:
Channel Width: