Lumens Technology VC-A20P - Manual (Page 25)

English - 24
When the environment is too dark to enable auto focus or fixed objects have to be shot in different brightness,
AF Sensitivity can be set to [Low].
1. Press [MENU] to activate the setting menu.
2. Press [
] or [] to select [Auto Focus].
3. Press [ENTER] to activate.
4. Press [ ] or [] to select [AF Sensitivity].
5. Press [ENTER] to activate.
6. Press [ ] or [] to select [High / Middle / Low].
7. Press [MENU] to exit.
6.8.2 Adjust the AF speed
The focus speed upon triggering AF Sensitivity
 [Normal] (default): Image flickering may not occur
 [Fast]: Fast focus speed
1. Press [MENU] to activate the setting menu.
2. Press [ ] or [] to select [Auto Focus].
3. Press [ENTER] to activate.
4. Press [
] or [] to select [AF speed].
5. Press [ENTER] to activate.
6. Press [ ] or []] to select [Fast / Normal].
7. Press [MENU] to exit.
6.9 I would like to set the image mode
1. Press [Picture] on the Remote Control to switch [Off/Neg/B&W].
6.10 I would like to freeze images
1. Press [Freeze] on the remote control to freeze the current image on the display.
6.11 I would like to rotate the image
1. Press [Mirror] on the Remote Control to switch [Off / Mirror / Flip / Mirror + Flip].
6.12 I would like to change the camera direction
1. Press [L/R Direction Set] on the remote control to switch [L/R Direction / Normal].
6.13 I would like to display the current status
1. Press [Info] on the remote control to display the current status information.
6.14 I would like to reset to the default value
Reset to default value using OSD menu or Remote Control combination key
 OSD menu: Press [MENU]  [System]  [Factory Reset]  [On]  [Enter] on the Remote Control and
reset to the default value
 Remote Control combination key: press [+] [8]  [8]  [6]  [Enter] one by one on the Remote
Control in order to reset to the default value