Lumens Technology DC265 - Manual (Page 32)

English - 31
7.14 I would like to play the slides (Slide Show)
7.14.1 Setting the slide show effect
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] to find the [Slide Show Effect].
4. Press [] or [] to select image switch mode between [Off /
Shutter / Right / Down / Side / Open].
5. Press [Menu] to exit.
7.14.2 Setting delay time
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] to find the [Delay].
4. Press [] or [] to select image switch mode between [0.5 Sec /
1 Sec / 3 Sec / 5 Sec / 10 Sec / Manual].
5. Press [Menu] to exit.
7.14.3 Activating/Stopping the slide show
Images over 8 MB, cannot be played. Whilst playing, the
[Rotate] function can be activated to rotate the images.
Remote control:
1. Press [Slide Show] to start playing.
2. Press [Slide Show] again to stop playing.
Control panel:
1. Press [Menu] to enter the setting menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] to find [Slide Show]
4. Press [Enter] to play.
5. To stop playing, repeat steps 1 to 4.
7.15 I would like to compare images (Compare live images
with captured images) (PBP, Picture by Picture)
This function will compare and contrast a live image with a captured image.