Mounting the dc265 at desktop, Connecting devices, 2 mounting the dc265 at desktop – Lumens Technology DC265 User Manual

Page 14: 3 connecting devices

English

- 13

4.2 Mounting the DC265 at desktop

1. Please set up the DIP Switch settings first. Refer to

Chapter 5 “DIP

Switch Settings”

in the DC265 user manual.

2. Please refer to the

Base Installation Guide

for installation instructions

for all parts.

4.3 Connecting devices

4.3.1 Step 1: Plugging in the power outlet

Appearance of power cord may vary with countries/regions.

4.3.2 Step 2: Connecting with components



Connecting to a projector



Connect the VGA OUT on the DC265 to the VGA IN on the projector

using the VGA cable.



Connecting to a monitor



Use VGA cable to connect VGA PASSTHROUGH connector on DC265

to the VGA IN connector on a monitor.

[Note] The VGA PASSTHROUGH connector only outputs VGA IN
signals.

AC Outlet