Lumens Technology DC158 - Manual (Page 26)

English - 25
3. Press [MENU] on the remote control or control panel to enter the
setting menu.
4. Press [] or [] to the [Setting] menu.
5. Press [] to enter [Projector Type].
6. Press [] or [] to select [LCD/DLP].
7. Press [MENU] to exit.
7.18 Restoring Factory Default Settings (Factory Reset)
Use the remote control or control panel:
1. Press [MENU] on the
remote control or control panel to enter the
on-screen menu.
2. Press [] or [] to select the [Advance] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [ENTER] to activate.
7.19 Computer- Related Functions
Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to 4.2.2 Connecting to
external devices and 4.4 Installing application software in Chapter 4
Installation and Connections in this user manual.
7.19.1
Inserting a Photo in the MS-Paint Application
1. Click [File> From Scanner or Camera] in the MS-Paint application as
shown in the bottom left figure.