Lumens Technology DC158 - Manual (Page 24)

English - 23
7.15.2 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
on-screen menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [] to enable [Delay].
4. Press [] or [] to select page-flipping interval [1 Sec/3 Sec/5 Sec/10
Sec/Manual].
5. Press [MENU] to exit.
7.15.3 Start/Pause/Stop Playing Images
Images over 8MB cannot be played. During playback, the
[ROTATE] function can be activated to rotate the images.
From the remote control:
1. Press [SLIDE SHOW] to start playback.
2. Press [ENTER] to pause playback.
3. Press [ENTER] again to continue playback.
4. Press [SLIDE SHOW] again to stop playback.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [] to enable [Slide Show].
4. Press [ENTER] to play back images.
5. Press [ENTER] to pause playback.
6. Press [ENTER] again to continue playback.
7. To stop playing, repeat Steps 1 to 4.
7.16 Comparing Live Images with Stored Images (PBP)
This function allows you to simultaneously display a live image on the right
side and a storage image on the left side for comparison.
Stored image Live image
C1
C3
C2
C4
C5 C6 C7