12 compliance statements, 1 c tick compliance, 2 ce compliance – LSC Lighting TEKO User Manual
Page 36: 3 disclaimer, 4 product of australia, Compliance statements
![background image](https://www.manualsdir.com/files/795180/content/doc036.png)
TEKO Dimmer
Operator Manual V3.0
12 Compliance Statements
12.1 C TICK COMPLIANCE
All LSC products with CE Compliance automatically comply with C-Tick requirements as per Section 182
of the Radiocommunications Act 1992. LSC Company Registration number is N921.
12.2 CE COMPLIANCE
The TEKO Dimmer from LSC Lighting Systems (Aust) Pty. Ltd. has been designed and conforms to the
following standards:
EN55015
(Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment)
.
IEC60439
(Low-voltage switchgear and control gear assemblies)
IEC60950
(Specification for safety of information technology equipment including electrical business equipment)
12.3 DISCLAIMER
LSC Lighting Systems (Aust) Pty. Ltd. has a corporate policy of continuous improvement, covering areas
such as product design and documentation. In light of this policy, some detail contained in this manual
may not match the exact operation of your product.
In any event, LSC Lighting Systems (Aust) Pty. Ltd. can not be held liable for any direct, indirect, special,
incidental, or consequential damages or loss whatsoever (including, without limitation, damages for loss
of profits, business interruption, or other pecuniary loss) arising out the use or the inability to use this
product for its intended purpose as expressed by the manufacturer and in conjunction with this operating
manual.
Servicing of this product is recommended to be carried out by LSC Lighting Systems (Aust) Pty. Ltd. or its
authorised service agents. No liability will be accepted whatsoever for any loss or damage caused by
service, maintenance or repair by unauthorised personnel. In addition servicing by unauthorised
personnel may void your warranty.
12.4 PRODUCT OF AUSTRALIA
All LSC Lighting Systems products are proudly designed, manufactured and distributed from Australia
and meet the highest certification of “Product of Australia” in the Australian Made Campaign.
LSC Lighting Systems (Aust) Pty. Ltd
Page
34