Louroe Electronics MS-1 - Manual (Page 6)

[1] Power-Volume Turns “ON” power to the unit and controls the audio volume
through the Speaker[9].
[2] Filter OUT Indicator Lights (green) when the audio filter is not in use and the Filter Switch[6]
is in the “OUT” Position. Also indicates power to the unit.
[3] Filter IN Indicator Used to enhance audio playback from 24 hour time lapse recorders. Lights
(orange) when filter button is pushed in.This function is no longer available with this
product
[4] Playback IN Indicator Lights (yellow) when Push for Playback[7] is pushed in to “ON” position.
[5] Overload Indicator Flashes (red) when there is a short in the power supply.
[6] Filter Switch Normally used for audio playback from a time-lapse
recorder. No longer available with this product.
[7] Push for playback Used for DVR/VCR playback. May also be used to listen to audio from an
external source. Press switch to listen to playback. Switch must be “OUT”
or “OFF” when monitoring and recording, otherwise live audio is muted.
[8] Headphone Jack Used for private listening. Any 3.5mm stereo headphone with 8 W to
600W impedance can be used.
[9] Speaker (3”) Provides live audio. Muted when a headphone is connected to
Headphone Jack [8].
APR-1
FILTER PUSH FOR
PLAYBACK
2-8 HRS
12-24 HRS
PLAYBACK
OVERLOAD
SINGLE
ZONE AUDI O BAS E STATI
ON
OFF
MAX
POWER-VOLUME
E
L
OU
RO
E LE CT RO NIC S
[3]
[4]
[5]
[1]
[2]
[6]
[7]
[8]
[9]
FRONT PANEL LAYOUT OF APR-1
INSTALLATION AND OPERATING INSTRUCTIONS
Page 6 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
ms_1_inst_3/15