Leprecon LP-1600 Series - Manual (Page 58)

58
106 6A Y Scene Channel 47 FADER 0-127
107 6B Y Scene Channel 48 FADER 0-127
NOTES: The following panel controls have no associated MIDI function: Data
Wheel, Modify.
8.5. Midi PROGRAM CHANGE Support
A midi device connected to the midi in port of the LP1600 can control some of
the playback aspects the CUE STACK feature. By sending a PROGRAM
CHANGE command, the STACK GO button can be “pressed”, and the NEXT
CUE can be modified. The following table shows the format of the two-byte
PROGRAM CHAN command:
Byte #1 Byte #2
MIDI data sequence: 0xCn value
Where: “0x” means that a hexadecimal value follows.
“C” is the hex character C, the Program Change command
“n” is the the desired MIDI channel number, 0-F
“value” is the number 0-127, where:
0 – GO button pressed
1-127 – NEXT cue number. Note that cues greater than 127
cannot be specified using MIDI.