La Crosse Technology WS-9124 - Manual (Page 13)

13
using the bracket which doubles as a stand or wall mount base.
To wall mount:
1. Secure the bracket onto a desired wall
using the screws and plastic anchors.
2. Clip the temperature sensor onto the
bracket.
Note:
The mounting surface can affect the transmission range. If, for
instance, the unit is attached to a piece of metal, it may then either
reduce or increase the transmitting range. For this reason, we
recommend not to place the unit on any metal surfaces or in any
position where a large metal or highly polished surface is in the
immediate vicinity (garage doors, double glazing, etc.). Before
securing in place, please ensure that the Temperature Station can
receive the 915MHz signal from the temperature sensor at the
positions that you wish to place them.
CARE AND MAINTENANCE:
• Extreme temperatures, vibrations and shocks should be
avoided as these may cause damage to the unit and give
inaccurate forecasts and readings.
• When cleaning the display and casings, use a soft damp cloth
only. Do not use solvents or scouring agents as they may
mark the LCD and casings.