La Crosse Technology WS-9124 - Manual (Page 10)

10
RESETTING THE MINIMUM AND MAXIMUM READINGS:
User may reset the minimum and maximum temperature / humidity
data to the current value by the following steps:
1.
Press the “min/max/+” key once to display the minimum data.
2. Press and hold the “min/max/+” key for about 3 seconds to
reset all the minimum / maximum data to the current values
in a single action. (Data of all outdoor and indoor data will be
reset at the same time.)
TEMPERATURE SENSOR:
The outdoor temperature is measured and transmitted to the
Temperature Station every 16 seconds approximately.
The range of the temperature sensor may be affected by the
temperature. At cold temperatures, the transmitting distance may be
decreased. Please keep this in mind when placing the sensor.
915 MHz RECEPTION CHECK
The Temperature Station should receive the outdoor temperature
data within a few minutes after setup. If the temperature data are not
Maximum icon