La Crosse Technology WS-3610 - Manual (Page 25)

22
14 PC Connection
In addition to the LCD monitor, the WS-3610 has the ability
to transfer all collected time and weather data to a PC via a
Com port connection. The supplied PC software provides
complete sets of history data, data graphing, and webpage
update capabilities.
14.1 Data Storage
For a comprehensive weather history, the Base Station allows
the internal storage of up to 1750 complete sets of weather data
with the recorded time and date. These data sets are stored in
non-volatile ring buffer memory (EEPROM) and will not be lost
even in case of an interruption of power supply (e. g. change of
batteries).
In the case that the memory capacity of the Base Station is
exhausted, the oldest data sets stored will be overwritten by the
new ones recorded.
14.2 Data
Recall
The weather data stored can only be output, processed and
displayed on a PC. The user selectable storage interval of 1
minute to 12 hours for data sets can also only be performed on a
PC.
14.3 Connections and Software
An included COM port cable provides the means to connect the
Base Station to the PC. The “Heavy Weather Pro 3610” software
package (also included) must be installed on the PC.
This software allows the display of all present weather data with
graphic symbols. It further allows the display, storage and
printing of history data sets, whose volume exceeds the
maximum 1750 data sets of the Base Station, and is only limited
by the capacity of the PC’s main memory.